Spulen Ultimate 2.5L Brake Vacuum Pump Delete Kit
The braking system on your vehicle requires a constant vacuum to assist in applying the brakes. Traditionally this vacuum is achieved by plumbing the brake booster to the engine’s intake manifold. This provides the needed vacuum to assist in applying the brakes.
However, vehicles equipped with the 2.5L engine do not receive vacuum from the intake manifold. Instead, the 2.5L engine is equipped with an external vacuum pump to provide the necessary vacuum. The vacuum pump design has numerous disadvantages including decreased power output from increased parasitic engine drag, the pumps oil seals are prone to failure and cause significant oil leaks, and a replacement pump cost upwards of $350 for parts and around $1100 if replaced at the dealership.
The Spulen Ultimate Brake Vacuum Pump Delete Kit addresses all of these disadvantages. The Spulen kit eliminates the factory pump using a block off plate with a high-temperature resistant o-ring. The brake booster is then plumbed to the intake manifold using custom silicone hoses. As an added benefit the included silicone hose replaces the factory plastic PCV hose which is prone to cracking.
What is the Ultimate Kit?
Spulen has created this intricate and unique system that solves a problem that occurs on most 2.5L after a certain mileage. Our kit was first launched as a significantly cheaper alternative to a vacuum pump replacement. The Ultimate kit uses a high chemical and temperature resistant O-ring along with cooling fins on the plate for a superior and complete kit. The O-ring replaces the gasket used on the previous version of the kit (SE-095). The cooling fins on the plate are also a Spulen exclusive for heat dispersion. The O-ring has been extensively tested through harsh and extreme environments to ensure a proper and durable seal. This kit also comes with Stainless steel, fully threaded socket head screw with a tensile strength of 70,000 psi. A 5mm Hex key required to install the (3) screws is also included, along with a pair of latex gloves. We have also replaced the old plastic barbed fitting with temperature resistant stainless steel barbed fitting.
Complete installation instructions are available below and each kit includes all necessary hardware to eliminate the factory brake vacuum pump.
Replaces OEM part# 07K 145 100H
Features
- Complete Vacuum Pump Delete Kit
- Includes new re-designed block off plate and O-ring
- Removes leaking vacuum pump
- Includes all needed hardware and silicone
Volkswagen |
Passat |
B7 (2012-2015) |
2.5L |
Volkswagen |
Jetta |
MK5 (05.5-2010) |
2.5L |
Volkswagen |
Jetta |
MK6 Sedan (2011-2014) |
2.5L |
Volkswagen |
Jetta |
MK6 Sportwagen (2010-2014) |
2.5L |
Volkswagen |
Golf/GTI/Rabbit |
MK5 (06-2009) |
2.5L |
Volkswagen |
Golf/GTI/Rabbit |
MK6 (10-2014) |
2.5L |
Volkswagen |
Beetle |
Beetle (2012+) |
2.5L |
Volkswagen |
Beetle |
New Beetle (98-2011) |
2.5 |
You can use this tab for adding shipping details, return policies and information or measurements etc.
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Nam liber tempor cum soluta nobis eleifend option congue nihil imperdiet doming id quod mazim placerat facer possim assum. Typi